Kenwood PB-34M, ,TH-22AT,TH-42AT,TH-79A, 9.6v 1000mAh NiMh Pk 2-Way Radio "mic problems" Questions

...problem thanks Before getting into the radio, I would check the following: If you are using hand mics, or a desk top mic, have you tried unplugging the mic and seeing if your sound returns? It ...

...problems: Your audio accessory jack is bad, you are using the wrong mic for the radio, or your mic is bad. Try the mic on a known good BPR40 and if it test good, if so, your BPR40 with the problem ...

motorola cp200 attached microphone will send but will not recieve Assuming you have the correct mic for the radio (HMN9030 or PMNN4013). It is possible 1) you have accidentally plugged the mic into ...

...talk problem When i push to talk on radio #1 there is no sound coming from radio #2 as if i have a mic problem on radio 1 . From radio #2 to #1 everything is fine. How do i repair a mic problem Hi, ...

need new mic for Raymarine #1VHF Radio 215 DSC The cord on my microphone cable is disintegrating - need to replace the mic Hello rikirsch, For replacement microphones for the Ray 215 DSC you can ...

I have a motorola mts2000 and it just started having sound come from both the earpiece and the mic. I have tried several different commports and mics and it still has not fixed the problem. Hello, Try

Kenwood TM-732A 440 Mhz cycles on and off when mic is keyed. I have a Kenwood TM-732A, haven't used in a while pulled it out to put in work truck and 140 Mhz side is fine but the 440 side when

when i push the mic the screen scrambles I turn radio on works good i push mic or someone talks it scrambles the screen Change the Mic, check the Power Supply, check the antenna connection because ...

...Contact Motorola Solutions. Get Support Mark Motorola Mobility Support The NMN6191 remote speaker mic should work with your XTS5000 radio. It is possible you have a problem with the mic itself, or

Audio distortion with desk mic System: Yaesu MD-100 desk mic, FT-1000MP, and VL-1000 amp. Original owner. Beginning about 5 years ago, using the desk mic, produces bad audio after about 1 minute of ...