Vornado Circulating Fan "rubbing noise" Questions

...noise. I can't see anything loose or rubbing. Is ther something I can lubricate to stop this. Wher exactly do I spray the lubricant and what kind shoul I use? Another person had a similar problem and ...

Oscillating tower fan makes a rubbing noise when turned on, can this be fixed? Lubricate bearings. Check for rubbing and adjust to stop same.

...noise. How do I fix? bearings are dry and noise is metal on metal you can try to oil/lube the bearings --and or a blade is rubbing on case either loose blade or bearings worn causing offset ...

You make this way too complicated. I just want to know in general, where to put some oil to stop the dry rub noise that I'm getting after my concord fan runs for a couple of hours. KISS approach is ...

...noise and then an electric rubbing hum. All the fan blade screws are tight and there is minimal wobble. Have done no recent painting (last time was 10 years ago). Usually dust every year or so, but ...

rubbing noise when in motion. Is there a way to use some electrical/ teflon oil to ease it's pain. MOTION NOISE OCCUR IN THREE WAYS 1. The bearing of the fan is not good, apply greese or lubricant oil

...noise occurs on medium and high speeds..not on low speed. Sounds like a bearing is going out. Can this fan be lubricated? If the fan is fairly new, remove it and return it to Home Depot. It is almost ...

...Does anyone have any idea what I can do to properly re-attach the bulb cover and not have all this noise? Check to make sure your blades screws are tight. They could be rubbing against the

rubbing noise heard when fan is on sounds like metal against metal hi there, you need to replaced bushing, due to loose of shaft to the bushing the stator is mis align. thats why you heard a cracking ...

rubbing noise,all speeds,blades are tight & and balance is good. what next??? 48 in.,4 bladed the plastic cover retainer screw above the blades .if the noise is there when spinning at all speeds check