Windchaser Stainless Steel Patio Heater 40,000 BTU by - Model PHS "flame goes" Questions

...low flame will not stay on high flame My Charmglow heater lites just fine then the flame goes to low and will not stay on high flame. I cannot adjust the flame up or down. Pilot sensor or ...

...goes to 2 blinks=cannot sustain or detect flame. There is a flame sensor located in the last burner that lights up. It is either not seeing flame or not getting flame to it within a certain time. ...

FLAME GOES OUT AFTER SHORT PERIOD OF RUNNING THE UNIT STARTS WITH THE FLAME LIT, AS IT RUNS FOR A SHORT TIME THE FLAME GOES OUT AND COOL AIR BEGINS TO BLOW. ONE YOU CLICK IT TO THE OFF POSITION IT ...

...goes out when turning up flame The flame is hitting the thermocoupler lower on the probe than it should causing it to go out. look for that first if that is the problem you have to redirect the flame ...

...goes out when the main flame shuts down. The pilot light will stay lit for days when heat is not called for but when heat is called for the furnace lights and the pilot stays lit but they both go out ...

...as the button is released the flame goes out. Does the thermocouple need replacing? yes or line it up in flame hits it better tip of flame lot of time they get slid out of flame and will cause ...

...flame goes away and then the error code comes on, you have something wrong with the over temp circuit, gas or gas valve, If the code comes on and then the flame goes away you have a flame sensor ...

Flame lights, then goes right out, and heateer blows cold air. Hello, Make sure the flame sensor is clean near the burners, The flame sensor is a metal rod that is on the opposite side of the ignitor.

...goes out... You may have moved the safety sensor or pilot flame tip. The pilot light heats a wire. The wire is the safety sensor. The wire has to be clean and in the pilot flame near the flame tip. ...

...flame goes out before the thermostat is satisfied. The igniter goes into a ignition sequence from here on trying to get the flame to ignite for ever. If i turn the unit off for a few seconds and then ...