HP Deskjet F2210 InkJet Printer "repair cartridge cradle" Questions

...cartridge holder) will move by hand. Disconnect the power from the machine for 5-10 minutes and then reconnect and turn the power on. If the machine goes through the cycling of the LEDs, open the top ...

...be the issue. If the above steps are not helpful then it may be the sign of a damaged cradle (the moving part over which the cartridge holders sit). In this case a repair person should be

...cradle, im going to call it a ribbon, anyways he pulled it out of where ever it was, i am trying to find a diagram of the inside of this printer so that i can identify what it was he pulled out and ...

cartridge cradle keeps jaming. Is it possible to repair this fault economically? Yes! it is possible to repair this fault economically. Usually you could have it replaced with a fairly used one if you

...Cartridge Cradle is Stuck Clear jam then press OK." So i opened the front cover and checked the cradle - appeared to be fine. I pressed "OK". Same message. I opened the back, and checked the rollers ...

cartridge'. Clearly, I need a new cradle latch fitted but no-one seems to want to repair printers. Part #'s for HP #56 black & #57color are: ASSY-LATCH BLACK - C6490-60011 ASSY-LATCH COLOR - C6490

...cradle itself may have been jolted and misaligned. You will need to replace the unit if that is the case. You should call and see if you can repair or upgrade the unit at a discounted price. If you ...

you're still having issues, there may be a mechanical problem; in which case you need to get it repaired by someone.Good luck

...cartridge cradle to move freely to the lef from the dockingbay on the right.Tried all HP solutions and partial reset -problem still prevail.Is this a mechanical problem ind any assistance how to ...

...sensor may be faulty and the printer will require repair. printer driver for xp It is cartridge problem. Don't get a refilled one, purchase a new one from hp and see if that fixes it, i bet it