Dell PowerEdge T300 Server  "6400" Questions

DELL POWEREDGE 6400 IS NOT BOOTING FROM THE CD Hello, Go to your BIOS and change the boot sequence so that the system boots to the CD 1st. (You should see a tab or label that says Boot Order or Boot ...

I opened and cleaned most of the inside of my Poweredge 6400 server. When I fired it back up, everything worked except that two of the three power supplies are not running. The middle bay is still ...

BOOT FAIL: PCF8584: I2C ERROR Fatal error: controller kernel self test failed. Controller POST operation failed. PCF8584: I2C Error: PIN without slave ACK, status=0x08 failed ***Error: selft test ...

...some help on a server that I have (was gifted) and has worked great until now. Its a Dell Poweredge 6400 running 2 15k SCSI drives in raid for the OS and 6 10k SCSI drives in raid 5 for the storage. ...

...would display the bootup screen, but went blank when Windows tried to start. I traded it for a PNY 6400 PCI (at recommendation of local store tech), which doesn't seem to even receive the bootup ...

it makes unexpectedly restart This server should never restart as you describe 1: Turn off remove all 3 power supplies clean, replace 2: Clean the insides removes and reset each add-on card? 3: Remove

...model How to clear the ESM log 2300, 2400, 2450, 2500, 2500SC, 2550, 4300, 4350, 4400, 6300, 6350, 6400, 6450 Use the Log2Txt.exe utility to clear the ESM log: Start your server to the Log2Txt ...

hp 6400 array controller don't post Hi ,, did you tried the offline diagnostics tools (Array Diagnostic Tool) and check it .