Transmits by itself When left on by itself it recievers okay then will start transmitting by itself. I have had the ppt board out no sign of any water damage. Is okay when ex mic/speaker plugged in. ...
my motorola sp50 will not turn on batteries are fresh and fully charged at 8.01V (7.5v battery) It is possible you have a bad volume pot (potentiometer). You might try turning on the radio slightly ...
...turns off My Kenwood ts-2000 radio has develop a problem where the front panel shuts off. The radio is still drawing current and sometimes I can turn it off with the power switch but not always. Have ...
Question about Cobra Radio Communications
I put new batteries in my Cobra 2-way radios and charged them for 24 hours. Still shows "low battery" when I turn them on. Check your charger and battery contacts. Cleaning battery contacts on the ...
...turns itself off when the PTT button is pressed, it is a sign of a bad or poorly charged battery. Try trading the battery with a known good unit and see if the problem is solved. If so, replace the ...
Question about Motorola Radio Communications
Is it true that when charging a battery, if you turn the power off at the wall but leave the plug in the device it drains the power? We find no evidence for or against this theory. Yet, anytime the ...
installation I just installed a Motorola M1225 mobile radio and it does not power up. I tried another radio that I had and no luck. I have power to the unit. Isn't it as easy as power, ground and an ...
Question about Motorola Radio Communications
turns off by itself with brand new batteries Just opened walkie turns off by itself with brand new batteries, tried more batteries nothing helps. Are you sure it is turning off and it is not just that
Radio Resets when I PTT Every time I PTT on my radios the entire display flashes and shows all of the icons and beeps exactly like it does when the radio is turned on. This happens on both handsets ...
Icom ic-v82 vhf transceiver. im going to tell what has happened with me i had an error in my transceiver, before this error occured with me, i was pressing buttons and trying a lot of things like ...
31 questions posted
Usually answered in minutes!
165 Questions
90 Questions
92 Questions
70 Questions