Question about Motorola Radio Communications
...turn the volume allthe way down I get no click and the unit stays on I have one unit that will not shut off I reduce the volume all the way down and the unit does not click off. Unfortunately, your ...
Question about Motorola Radio Communications
...turn to vox mode you must to save ,or the mode will back to before you change if you are not using a vox headset in the jack it will not work. headphones are only AF audio and will not transmit. You ...
Question about Motorola Radio Communications
...not get the roger beep to turn off on my T5000 We could not immediate locate a user guide for your T5000 radio, however, the T4900 and T5100 radios manuals both indicate the roger beep is turned ...
...not turn on Hi ! I just bought two T6500 on ebay, they worked great the first days, then one unit just didn't turn on when twisting the on/off button (the LCD display does not turn on). I changed the ...
...not turn on. After a close inspection, I noticed variation in the way and the shape in which the battery contactors were bent to make contact. I used a snall knife point and re-shaped the contacts ...
...not turn on batteries are fresh and fully charged at 8.01V (7.5v battery) It is possible you have a bad volume pot (potentiometer). You might try turning on the radio slightly differently, such as ...
...not display anything when I turn it on. when you press the PTT button it takes much current to operate if it didn't get much current it sounds a beep sound try it by fully charged battery if not ...
mh230r wont turn on one radio wont turn on faint red light when turned off buy a new battery if not : these are one-way radios. no service, no spareparts. just trough away and buy new
Question about Kenwood Radio Communications
...not work it Field Programming procedure for the Kenwood TK-270 or TK-370 handhelds. Press and hold (light) & (dial) while turning on radio. Hold until (SEL) appears on the display. Pressing (SCN) ...
...not turn as fast (and noisy) as a computer fan. You'll want to make sure that the dummy load can handle the power, and that the SWR is low to begin with. If the oil gets warm before the fan turns on, ...
174 questions posted
Usually answered in minutes!
90 Questions
92 Questions
70 Questions
63 Questions