Amana PTH093B35AM Thru-Wall/Window Air Conditioner "fan speed low auto" Questions

Ad

Question about Dometic Heating & Cooling

1 Answer

...speed fan comes on for the Cool mode via the fan relay, while the Heat speed is low speed and controlled not by the fan relay but the temperature or time delay, you need to determine what speed you ...

Ad

Question about Danby Heating & Cooling

1 Answer

...fan speed can be adjusted. Press the FAN key (Fig. J) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each depression of the fan key will advance to a ...

Ad

...heating. Normally closed should be the low speed, and normally open (closed when the relay is energized) should turn on the fan in high speed. Make sure the fan (isolation) relay is wired

Question about Heating & Cooling

1 Answer

...fan speed and your heat may start working. You will have to access the blower motor to find this out. Red color is low and black is high. Move the Red wire to another speed on the motor and see what ...

Question about Weather King Heating & Cooling

1 Answer

...fan to come on in high speed. When your home cools down and the thermostat cuts the air conditioner off, the low voltage coil terminals 1 & 3 are denergized, and the fan goes off. Sometimes these ...

Question about Sanyo Heating & Cooling

1 Answer

...fan speed low M-means fan speed of med H-means fan speed of high. To get proper cool, mode "cool" and less 3 degree minimum than your room temp. To get proper Heat mode "Heat" and 3 degree more than ...

Question about Carrier Heating & Cooling

1 Answer

...operation wihtout having it totally cooled It sounds to me that the air con is on auto fan, as the room gets hotter or colder the fan will slow down and stop. keep the fan on low,med or high fan ...

Question about Heating & Cooling

1 Answer

...switch and fan stops reinsert and fan runs at low speed central air does not cycle on and off when calling for temperature. Thermostat is bad or set for auto. Set t stat to on for fan

...you go to thermostat and put the fan switch to "on" the blower should operate on "high" speed.With the fan switch set to "auto"the operation will determine the fan speed.Hope this helps. ...

Question about Heating & Cooling

1 Answer

...speed Thermostat fan control indicates low, med, high and auto. No matter what is selected the fan only runs on high. Other then the speed control the unit functions perfectly. Wild guess the fan was ...

Not finding what you are looking for?
Amana PTH093B35AM Thru-Wall/Window Air Conditioner Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Amana Heating & Cooling Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Amana Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...