RTO Ho Herpa Freightliner Truck Tractor "electric toy car problems" Questions

...car model no HD 6838. one of the wires has come off and the motor wont turn. the wire is a single wire which is pink in color but i cant find were it goes to. would appreciate any advice on were it ...

electric problem then the car turn off. what problem posibly it haves? this exact problem on a megane coupe is caused by a small air pipe that connects to a 2 inch wide black box that is located under

...Electric Riding Toy Won't Run Two years old, battery is fine. Just suddenly started making terrible noise when you push gas pedal in any gear and doesn't move. Took it apart and noticed gray round ...

i have a battery powered corvette ride on and once we start it and press the accelorator the car shorts just wondered if u could help me with this problem. Common problem with these vehicles. If you ...

...problems, it has an electric start and i have been told it could be the cold start valve or the coil could this be correct ? i have same problem and changed both coils nd spark plugs and it's still ...

...Electric Animated set No. 385. Everyt car on the train lights up but we can't get the train to move or take any of the commands from the control panel. What could be the problem? Check to make sure ...

electric car purchased at Wal Mart won't go, even after a full battery charge. It was working fine until 4 little kids got in and went uphill - just stopped working. Weeks later, worked for just a few

...toy ,which was working perfectly for 2 months .all of a sudden it wouldn't.work,I replaced a set of 4 batteries and tried several times,but I stil.wouldn't.work.pls hlp There could be many different ...

but the othher wheel turns to the left and i cant fix it, the only problem i can think of is its an electrical problem the one that turns left by itself has come loose from the turning servo, you must

...Electric Novatech High Speed HSP Brushless 70A ESC for Cars, Buggi ,,,,i bought my rc car with a 3300kv motor and i need to change it to 3900kv ...do i need to do some sort of settings to the esc to ...