Question about Eiki Office Equipment & Supplies
...shuts down. The main cooling fan immediately comes on to cool it down. All filters are clean HI there Is there any on scren messaes before shutting down and when shutting down - which of the LED's on ...
Question about ViewSonic Office Equipment & Supplies
...down...is there a reset button if the lamp shuts off and the projector still runs, it's a cool down mode, and will shut off when it reaches a low enough temp. if the lamp doesn't shut off and none of ...
Question about Panasonic Office Equipment & Supplies
...shuts down as if over heated. Lamp on low, filters clean, fan on high. Cold start and it runs for approx 1 h, then shuts down and automatically starts again. Runs for 20 minutes shuts down and so on ...
...down on its own at intermittent times. The bulb will shut off and the fan will run for a minute or two, then the unit shuts off. I can power it right back up, but I don't want to continue to do that. ...
Question about BenQ Office Equipment & Supplies
...shuts down. if it goes through shut down mode (lamp first and fans run a while), reset the settings to factory default. while you're in the menu, check the lamp hours (under settings). if they're ...
Question about HP Office Equipment & Supplies
projector have pic for about 20 sec shows HP logo and then shut off the lamp ok Check the fan. Looks like heat building up inside and to prevent further damage, the unit is shutting down. The lamp ...
Question about InFocus Office Equipment & Supplies
...shuts the whole thing down, fans and everything. If it is shut off using the on/off buttons on the remote or on top, the fans keep running until the unit is cooled and then powers itself completely ...
...shuts down Two things that usually gives this symptom. One, internal heat sensor will shut down projector if extreme heat is present, usually caused by dirty filters, fan failure, etc. Two, your bulb ...
Question about Office Equipment & Supplies
The projector lamps always burning out. I think, the cooling system does not work?How does the projector work? Make sure not to shut down the projector after use. Wait until the fan stops. The fan is ...
...shuts down. the temperature light will go on as well as the lamp light is turned on. the light status after auto shuts down were: Power light indicator = OFF Temp light indicator = RED Lamp light ...
186 questions posted
Usually answered in minutes!
