...be really appreciated. Depending on how the private lines were programmed, you need to pull the ringing out of DIL 1:1 if it was assigned and put it into DIL 1:N. Look at programs 407-8 and 603-4. ...
Question about Panasonic Lands Phones
1 from NORMAL to DIL and Enter Jack 01 for Reception or whatever Jack is connected your to preferred answer point Do the same for each CO Trunk line. They could be different answer points or same Auto
...mean have calls transferred to voice mail? Go into system programming and change 408 (DIL 1:1 Nite) to point to the ext of the voice mail port, which depends on your system. That number is found in ...
...a built in disa feature, then you need to program the DIL (sys. pgm. # 418) to DISA-OGM 1. Then you need to record an OGM (program 9,1,1) to tell you customers that they can dial the ext.#
Question about Panasonic Lands Phones
DIL and if it asks for line number place 01. It will show an extension number typically 165. Hit the transfer button then hit the store button. Now this can also be done under intercept with the rings
...1 handset rings because in default only one extension is allocated as the operator - you will nedd to enter system programming PROG * # 1234 AND SCROLL THROUGH PROGRAMMING you will have to find - ...
...TELL YOU THAT YOU COULD GO TO THE PROGRAMMING MANUAL FOR A PANASONIC KX-TD 816/1232 AND LOOK AT DIL 1:N PROGRAM 603 AND 604. IT'S WHERE YOU SET THE EXTENSIONS THAT RING WHEN A CALL COMES IN. ...
245 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions