...if not there, then they are on the bottom. Remove those screws, then the top housing comes off and the belt and brushroll are in the open.Part # 61120A long life belt. Brush roll #62365-2 if
...don't see any screws on the top, then you will have to turn it over and they should be on the bottom. Maybe 4 of them, then you can get to the brush roll and belt. It uses a 61120A long life U
...to Wal-M and look in their "bags and Belt" book located next to the Vacuum cleaners. Hi I'm Peter, Belt number for long life belt is 61120A. Here is a link to all the parts breakdown for your
...Belt is #61120A U long life, brush roll if you need it is #62365-2. If the brushs look ok and the ends turn freely, then it is probably ok. The belt goes around the brush roll then up to the motor ...
...belt part number for the Eureka 5848 AV-2 vacuum is 61120A. Should you need part numbers for other pieces of the Eureka 5848 AV-2 vacuum, click on the following site, ...
Question about Eureka Vacuums
Belt U Style 2 pack #61120A (and it replaces 54312, 54312B, 54312D, 61120, 61120B, 61120C, 61120C-12, 61120-D, 61120D-12, 31120F, 61120F-12, 61120G.) $6 on Amazon. https://www.amazon.com/dp/B005Z1GWZ6
...the brush roll(62365-2) and a new belt (61120A)while you are at it. Also check the slots where the brush sit in to make sure they didn't melt too, if so you would have to replace the
...belt is a lon life "U" part #61120A. The brush roll is what drives the vacuum, but if brush roll or belt is bad, then it won't drive it. Hi there, Often on these models the right rotating, hexagonal ...
5 questions posted
Usually answered in minutes!
157 Questions
154 Questions
86 Questions
80 Questions
71 Questions