...ironed and when the shirt was being readjusted on the ironing board, the iron was placed on its heel rest. When the iron was taken off the heel rest such that the sole plate was in a horizontal ...
Question about Euro-Pro Irons
...the instructions for emptying the iron. 9.Turn the variable steam control dial to the ?0? position when the water tank is empty.10.Place the iron back upright on its heel to cool down before
...very hot. Exercise care while wiping. ? Place iron on heel and leave to cool. Before using iron after self cleaning, test steam and burst of steam on an old towel or cloth than can be discarded. no ...
...a strip of sandpaper, but you need to dismantle the iron first. Remove the 3 Torq screws in the heel plate (the purple triangular bit at the back, that you stand the iron up on when it's cooling ...
...heel and allow to heat for 3 mins. Now unplug the iron and take it to a sink move and Hold the variable steam dial in the CLEAN position. There may be some hissing and spitting while cleaning so be ...
cool completely. Wipe the soleplate and outer surfaces with a soft cloth dampened in water and a mild household detergent. Never use abrasives, heavy duty cleansers, vinegar, or scouring pads that may
cool completely. Wipe the soleplate and outer surfaces with a soft cloth dampened in water and a mild household detergent. Never use abrasives, heavy duty cleansers, vinegar, or scouring pads that may
...heel plate area). Good luck! The best advise I can offer is to take your Rowenta to the garage, put on safety glasses, grab a #10 sledge-hammer and pound the **** out of it. This will fix the water ...
4 questions posted
Usually answered in minutes!
17 Questions
8 Questions
9 Questions
4 Questions