Question about In Microwave Ovens
...ceramic. I'm not sure if it is fast or slow blow? Looking for specification for power fuse? F1: 25A 125V 3AG FAST CERAMIC ...
...internal fuse blew, you can get them at most hardware stores its either a 15 or 20 amp ceramic fuse, then if this blows again chk your h.v. capacitor,h.v. diode,or the magnetron tube for ...
...ceramic fuse I have a Maytag model CME9010CAE microwave oven. It is blowing the 20 amp ceramic fuse. I replaced the fuse, reset the clock and everything seemed to be ok. Once I tried to heat some ...
ceramic fuse inside (automotive style fuse) which may blow in the event of a power surge or failing magnetron. These are available at most radio shack or appliance parts store for a couple of dollars.
ceramic fuse repeatedly Most microwaves usually use 15 amp fuses and not 8's. If it keeps blowing fuses there is a short circuit somewhere and you would need to track that down to stop your problem. A
microwave fuse fast or slow blow They are usually a slow blow ceramic fuse
...ceramic. The fuse should be available at hardware stores, Radio Shack. If the fuse is blown, there is a very good chance you have another problem, possibly a bad or misaligned door switch, shorted ...
...ceramic fuse that blows normaly but allbeit slamming the door can blow the fuse it can be another fault that blows it ie if your unit is an inverter microwave it mite be the magnetron or the inverter ...
...ceramic internal fuse /replaced magnetron/fuse then blow again/replaced capacitor/fuse again/blown again/ could problem be power transformer? Maybe... Did you check the high voltage diode?... A ...
ceramic tube..it should be in a fuse holder...the usual types used in the microwaves are the "MDL" ceramic type...these are used for safety reasons and are rated around 15Amps...Be sure to use correct
3 questions posted
Usually answered in minutes!
80 Questions
95 Questions
80 Questions
69 Questions
56 Questions