...runs for exactly 3 seconds and then shuts off Before this problem for a week it would intermittently not heat while running It ran but no humming noise Then suddenly it began shutting off after 3 ...
...runs for about 3 seconds.After Microwave only runs for about 3 seconds then stops and the timer goes back to the clock mode.After several attempts then it will work.Problem is intermitten Chances are ...
runs for 3 seconds the microwae runs about 3 seconds and then turns off check inverter transter or Magnetron short to be repalce G.K.MAHENDRAN. Date: 09.05.2008
...3-5 seconds I have a GE spacemaker microwave that was made in 2005. Model number is JVM1650WH01. When I start the microwave it wil run for 3-5 seconds and then stop. The numbers become unreadable and ...
...runs for 3 seconds and stops My inverter panasonic microwave runs for 3 seconds and stops See if this describes what's happening: Put in time, push start and unit runs for 2 seconds, relay clicks, ...
3 seconds. It continues giving me refer to manual error. What would the problem be? Is it worth trying to fix or is the microwave just finished? If microwave runs only without turn table, I am suggest
...3 seconds. If the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle. If it stops after 22 ...
Question about Panasonic Microwave Ovens
runs for 3 seconds and stops as if the time had run out. It doesn't even say Enjoy (a bit of honesty there). Otherwise the fan, lights and messages work fine -- cooking is the only thing it doesn't do
Question about Microwave Ovens
...runs 2-3 seconds short in the circuit or magnetron take it in for a proper diagnosis but generally it is more expensive to repair than replace The most common culprit is usually the high voltage ...
64 questions posted
Usually answered in minutes!
80 Questions
95 Questions
80 Questions
69 Questions
56 Questions