...valve and let circulate through other jets. when I came back out to shut spa down there wasn't any water flow and motor was still running. so I shut down system and drained tub . took pump housing ...
Question about Hayward Pool & Spa
...starts and then after about 3 seconds shuts off I have a Hayward (D300 ?). I have water pressure. THe heater will start up like normal and then after about 3 seconds it shuts off. What could be the ...
...starts and within 5 seconds it shuts down and displays that error code AGS - Auto Gas Shutoff = Because of a problem sensed, the gas valve is closing, stopping gas supply and hence heater ...
...starts cyling like this, the cycles are short 5-10 secs. I need to shut it off to stop it. The control panel shows not error codes. Does anyone have any suggestions? Thank you. This is a water flow ...
...starts making a loud banging noise and then the HS code comes on and it shuts down. the noise continues for about 15 to 30 seconds after the burners shut down, This sounds like a low water flow ...
...valve also turned on. check to make sure you are gettin proper voltage to igniter. ensure proper water flow from
...shuts down but the incoming water is 79 degrees. It sounds like you have a by-pass valve that is open. It should be closed down. You will find this on the pipes in and out of the heat pump. The valve ...
172 questions posted
Usually answered in minutes!
774 Questions
104 Questions
113 Questions
87 Questions
78 Questions