...boss 4d keeps shutting and their is no dirt in the container so no suction either.Feels hot like the thermostate turns it off. Have change filters also. Thanks Nancy take the brush roller completely ...
boss 5893A brush roller will not work I have used the reset button and also checked the belt which is working but the brush roller will not move. I just got the vacuum and the brush roller was working
How do I take off the roller brush on my Eureka Boss. Something is caught inside and I don't see any screws to remove the roller. the screws are on the top.
...Boss Capture 8803AVZ Bagless Upright Vacuum smells like it is burning First you need to checkl and make sure the roller brush is not jammed up and the belts is not slipping due to the brush not ...
Question about Eureka Vacuums
...Boss Power Plus" 12 amp Hi. The roller brush won't turn so I assume a belt inside is broken or disconnected. Problem is I don't see a way to get inside the housing. Any ideas? Depending on the model ...
boss'' 25th anniversay editon. Take the top 2 screws off the top of the hood. Lift the hood off forward. That will get you access to the roller brush. You will need to take a flat headed screws driver
...brush roller out to swop the belt but check you fit the roller into its slot right,,,,dont turn the roller end bearings as they have many ways they can fit back in but they need to be set up right ...
...boss bagless If it's a rattling type noise, its possibly something in the fan assembly, including a broken off piece of the fan. It could also be something loose near the roller brush, including a ...
...61110A) And the roller i think: Genuine Eureka Brush roller part number 61250-3 for Eureka The Boss/Smart vac/smartvac ultra 4800 series vacuums including models 4870 and 4880 Hope this helps
199 questions posted
Usually answered in minutes!
157 Questions
86 Questions
80 Questions
71 Questions
49 Questions
