Question about Black and Decker USA Vehicle Parts & Accessories
...light First: the Jump-Starter power switch must be in the "On" poistion, or no voltage will be delivered to the clamps to light your test light.
Second: from the Black & Decker JUS350B owners ...
light fuse Probably the quickest way is to replace it see if the lights now work. If you have a multimeter you can set this to check continuity. Look for a symbol that looks like a sound wave. Caution
...power distribution box in the engine bay for the headlights, but I doubt this is blown because the high beams come on. It sounds like a switch problem in the steering column. Sometimes the spring ...
...power from it-such as a TP, MAP or a/c pressure sensor-there will be no reference to the CMP or CKP sensor. In this case, if an LED test light or a logic probe is connected to the sensor signal wire ...
Question about Vehicle Parts & Accessories
...light tester to the ground side the blower motor will run with the a/c and blower switch off? First is there power at the CONNECTOR to the clutch? unplug it and run the vehicle, with a Volt meter, ...
switch ck with text light , ck power 12 volts again at the battery side of the starter with test light or voltage test .I also think that power goes through the alternator to power the starter this is
Question about Vehicle Parts & Accessories
light because if it worked and you pulled the bulb it is not longer getting power and if it was short the bulb would have burned out ,this is not what is shorting it out and killing your battery , are
4 questions posted
Usually answered in minutes!
2 Questions
1 Questions