Uniden Cordless Phone exai398i "message goes base" Questions

...message. It could be one or more of these: - the cord that goes from the base unit to the phone company wall jack is faulty - the cord that goes from the base unit to the phone company wall jack is ...

...the handset. The handset message never goes away, I can't even get into the menu. (Got this from a Panasonic Support Tech...Thanks Panasonic!) The following steps should help.... Resetting ...

...a message "No link to base. Move closer to base, try again" Well, you could move closer to the base, or try this: RE REGISTER the HANDSET. That works every time when our cordless goes stupid. ...

...goes to the automatic message. How can we change this? CLICK HERE for your owners manual in PDF format. However the model # is for an external handset (add-on) The number of rings is set on the base. ...

...goes to the answering system, the base unit does not broadcast the answer message, nor the message being left. Press the volume up button when the call is answered. ...

message ''welcome.. please wait'' displays then flashes and goes no further except briefly lighting up the menu when I press and hold one of the function buttons ) on the other, the handset microphone

...goes blank and I get a message to connect to base. when i connect it says it already is fully charged. what is the source and solution to this problem? Replace the batteries. That will solve your ...

message. how do I fix this? After putting in new battery phone says searching, but never goes past searching I don't know what model it is but try these:1. Check the main base is powered up!2.Take out

...message: no link to base, olace on cradle. Any one can help. Thanks. Our Panasonic cordless goes stupid about 3 times a year. It basically involves going into the setup menu on the handset, select ...