Hunter 28096 Westminster 52" Ceiling Fan with Light "runs high speed" Questions

high speed it runs at medium speed. When switched from high to medium the speed does not change. Most fans have a small rectangular multi-tap capacitor connected to the speed control in the fan. It is

...High Speed works lower than Medium speed. My email is [email protected] 1. Set the remote to run the fan on high. 2. Pull the fan speed chain until the fan reaches high speed. 3. All speeds should ...

...runs only on high speed. Powered off, then pressed and hold fan button. Initial slight movement of fan, but then nothing. Quick press and release of fan button, and fan will run only at high speed. ...

...runs on high speed My fan that I installed yesterday (new Fan) makes a knocking soung when run on high speed only. At other soeeds it is fine. The bolts might be loosely fitted. So try to fit them ...

...runs at a slow rpm at high, but the problem I;m havig is it automatically changes from high speed to low speed, it has even been at a complete stand still in the morning when it was running on high ...

...speed, instead of the 3 it used to have. Any ideas on what may be wrong, or how to fix. assuming you havent messed about with the wireing it can only be the pull cord switch fault or the motor is on ...

...high speed in the high position, but only low in the middleand low speeds. Replaced the pull switch-no change Replacing the pull switch (reostat) should have solved your problem. Try going to the ...

...high speed in reverse direction. We had a water leak from the second floor onto the ceiling downstairs near it and had reversed it to help dry. Now, in regular direction it wobbles only on high. Low ...

runs on high. How can I fix the motor so that it will run on all three settings? I have had the fan for several years, so it isn't under warranty. The other speeds slowly started failing about 2 years

...speed. High speed & low speed seem fine just middle speed has thev issue of running slow than before. What could the problem be? Several months ago replaced the speed switch with no problems, ...