Excalibur. K9-MUNDIAL-SS Entry Level Auto Alarm with Dual Zone Shock Sensor "reprogram push button locks" Questions

...reprogram remote. turn key to position, push valet button 5 times and then push the lock button on remote Turn ignition on, then off. Press valet button 5 times within 5 seconds, then once again (the ...

...reprogram it. I have a k-9 mundial-2. Everytime I push the vallet button it chirps and I follow the instructions and as soon i hit the vallet button it chirps. It wont let me program it. turn key to ...

...reprogram python 990 replacement remote turn ignition on and within 10sec push the valet switch once then push and hold again. the siren will chirp once then push the lock button on the transmitter ...

my battery went dead and now my remote doesn't work and the keyless entry doesn't work either. reprogram remotes turn ignition key to on position push valet 5 times then hit the lock button on remote

...push the unlock button on your remote control (and on your other remote control if you have two), then release the button on the antenna and then turn the car off. You should be able to lock and ...

...reprogram, if thats what I need to do, it says to push buttons I dont have, like valet, F or program. The only buttons I have are the ones listed above. Any help would be awesome. If you have the ...

push the start button. With the "Ultra" brand, you use the button on the windshield antenna to retrain your unit. I'm not sure about the Autopage brand. An installer should be able to reprogram it for

reprogram my remote for car REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 times and hold in

...button is pushed, the locks should cycle. Up to 3 remotes can be programmed. 7. Turn ignition completely off and remove the key. Step out of car and close door. The remotes should be programmed and ...

...Reprogram the remotes using this procedure: REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch ?OFF/ON? 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 ...