Excalibur. K9-MUNDIAL-SS Entry Level Auto Alarm with Dual Zone Shock Sensor "alarm system valet mode" Questions

...system ! You must put the alarm on a valet mode to see if the alarm is causing this problem To enter or exit Valet Mode 1. Turn the ignition on 2. Turn the ignition off 3. Press and release the valet ...

...your alarm may be in valet mode causing the system to act as a keyless entry system. you can verify this by checking your alarms LED light on the dash, If the light is on solid the system is valet ...

alarm system doesn't work. Keyless entery remote works to open and lock doors but no alarm. How do I reset the alarm on Ford explorer 1999? It sounds like the system is in valet mode. Depending on the

valet switch, your alarm is most likely in valet mode (youll know cause the led stays on) if that doesnt work, turn the key on and off then toggle thye valet switch 3x and that'll turn off silent mode

my alarm is in valet mode and silent, need to get out valet mode, how? Open vehicle door, press lock, unlock, lock on the alarm remote.

...system is in valet. A visual notification that the alarm is in valet mode is the LED light is on solid. If the LED is on solid and you wish to make the alarm active again, turn the ignition on then, ...

...alarm is silent. I am not hearing the noise when I open the doors are close them. How can I activate this feature again? Is the LED indicator illuminated steady (not flashing)? If it is, than the ...

...horn on alarm you are in valet mode. find valet switch under dash or driver kick panel. turn key on then push the valet switch for a few seconds. light should go out and then function properly

...alarm is disarmed will put the system into valet mode. The system will turn the LED light on steady and chirp the siren to indicate that valet mode has been activated. To exit valet mode, press and ...