clicking noise when peddling Turn each peddle in turn( peddle bearings) Check main crank bearings some times locknut comes loose, or wheel bearings.
Question about Columbia Sportswear Cycling
...holds the ball bearings) on both sides of the crankset, then you may have lost the balls when it became loose the first time. In that case, simply tightening the crankset will not solve the
...a fix. There are several bearing styles out there. Some are sealed and some are loose ball bearings. Either one requires disassembly for fresh grease to be applied. I'd get a bike shop to look at
...and wobbling on the axle (bearings) or are the spokes so loose the rim is moving independently of the hub (needs truing and tensioning)? Either way - it's shop time. Search the web for ...
...bearings). Chain tension too loose: Move the rear wheel away from the pedals by loosening the axle bolt, pulling back to remove most (but not all) or the slack from the chain. Pay attention to the ...
Question about Schwinn Cycling
...loose and makes a clunk/sort of grind noise. Any help would be greatly appreciated! You wil need a couple of special tools, or be fairly creative with the tools you have. remove the dustcovers in the ...
...loose in the wheel (hub bearings shot); or the spokes all loose or the rim untrue? We have limitations to diagose physical problems. Web searches for any or all of those malfunctions will lead to ...
...and the ball bearings were falling out. Is this natural? Gravity works everywhere so yes it's normal for loose parts to fall out. ...
...what bearings it needs. If you have cartridge bearings it will have a number like 6002 on the rubber seal, if they are standard round loose ball bearings than it will be a size like 1/4" for
bearings on the lefty hub. When I noticed the wheel was loose and took it off the spindle pieces of the large bearing mounted near the brake disc fell out and I was able to pry out the rest but I don&
8 questions posted
Usually answered in minutes!
23 Questions
2 Questions
1 Questions
