Nordic Track /proform Treadmill Drive/motor Belt 118016 "move sole" Questions

...Sole treadmill to work. THe lights come on and the display asks us to "select Start or enter a program". If we select start (like we usually do) nothing happens. And if we try to select a program we ...

...Sole F63 treadmill to move it? lift up the plastic pieces that cover the upright arms. remove the 4 bolts on either side. have someone lift the uprights and console straight up. on the right side ...

Moved treadmill to new room and when reassembling the incline level automatically went up to top level. Treadmill is stuck on top incline level and keep getting elevation error message. Have tried ...

...SOLE/F63_F65_OM_810.pdf '1.If the belt moves, but stops after a short time and thedisplay shows "LS", run calibration. (on next page) 2.If you press start and the belt never moves, then the display ...

Sole is doing the same thing. Thanks! I dont know if you ever got into the service mode but the first thing you need to do is get into the service mode. If the buttons do not beep when you press them,

...Sole f83 will not start. initially Fans run, can raise/lower. will act noemal until motor should run/doesn't. then raise/lower function stops. If I try to use speed buttons LS light shows. moto ...

...so that you are touching the metal contacts. If necessary, clean the handles with a soft cloth to remove sweat or lotion residue. Do not grip the handles too tightly or move your hands excessively. ...

the display lights up on my treadmill but the belt doesn't move Unplug your unit remove the motor shroud then plug unit in now on lower board their should be some LEDs Get on the the unit and with one

SOLE F80 TREADMILL STARTS TO RUN THEN STOPS. "LSI" OR "L51" APPEARS IN THE TIME BOX AND "LOW SPEED" APPEARS IN THE DISPLAY SimplerFASTERSolution So, I had the same problem. After removing the motor ...

move (it does manually). It seems like it must be the motor. If that is the case, is it reasonable to say that I can replace it myself. I am somewhat handy and can certainly read an instruction manual