...need to do a soft reset - see post - did a # and * while rplacing the battery , but has not reset the phone correctly - registration fail message. 1. Disconnect Battery from handset(s) 2. Disconnect ...
Need to reset phone after power outage. CL keeps flashing - alternately flashes with CL and 0 Hi, Here is the procedures on how to reset the phone: 1. Disconnect Battery from handset(s) 2. Disconnect ...
...plug and the cord from the base of the phone to the "Phone" plug, and you machine should work. The power supply will also need to be plugged into the base of the machine and then into a wall
phones. We hear the dial tone but whenever we try to dial the number, it won't connect. It will just go right back to the dial tone. It isn't our phone lines, because we have another phone in the room
...plugged in all the way.( It should click in) Move phone to a different location in the home. (Different phone jack) Disconnect AC Adapter and reconnect it After 25 seconds. Reset the Digital Security ...
...If you are on VOip, then you have alot to check...make sure that the cord is plugged into the "phone jack" on the back of the router, and you need to plug the base into the electric wall outlet
need a new handset and if so is a replacement availabe? Thanks, Larry Unplugged wall unit from the 110 volt outlet and the phone line from the unit for about 10 or more minutes. The phone worked after
Question about Uniden Lands Phones
...cause this aa I need this phone Have you checked the phone cord going from the wall to the uniden base station. If thats ok try pluging it into the wall jack you currently have the vtech plug
phones if the base is unplugged, the power brick has failed or the power adapter was plugged into a power strip (or surge protector) that has been turned off. It can also happen if the circuit breaker
4,850 questions posted
Usually answered in minutes!
1,326 Questions
1,157 Questions
514 Questions
232 Questions
194 Questions