Uniden Cordless Phone "finding base reset" Questions

base. Need to reset phone because don't remember PIN. Reset function does not work because there is no message 'Confirm?' or WELCOME. Can you help? hi rsacauto below is the manual for the unit to walk

...reset to the base 1 setting.I tried resetting, registering, rechoosing the base 1, removing and reconnecting the battery, but nothing has worked. Any suggestions? This is the secondary phone that is ...

...base unit. I get "out of range", I have taken the batteries out of the 28101 models to let them "reset" with not luck, still "out of range". GE assures me that I have the correct handsets to go with ...

...reset: Pick up the registered handset and then press /FLASH . Press OFF/CLEAR and place the handset back in the telephone base. -OR- Unplug the power from the telephone base, then plug it back ...

...reset the entire system Step 1: Disconnect the power to the telephone base. Step 2: Disconnect the handset battery. Step 3: Wait a few minutes and then reconnect the power to the telephone base. Step ...

...HANDSET all phone rings. What should I do Do I have to reset the base to remove all combined and put one by one? And how do the Reset Thank's j'ai fait un reset sur les combinet et tout est

...base station is on reset unit restart handset reg, have tried all but gets to waiting then goes back to searching, so no dialling tone or anything, please help. Turn base around and find the area ...

the locate handset button on the base for 4 seconds. The base beeped for about 30-45 seconds and they just started working. Somehow I believe they got disconnected from the base and needed to be reset

ringer volume is turned all the way up. Disconnect the power from the back of the main base, press and hold find hs key while reconnecting power until you hear long beep. Should reset base and handset

...base it is assigned a handset number. If you have forgotten your PIN you will need to: Reset your ORB 1. Press MENU, scroll to ADVANCED SET and press MENU 2. Scroll to RESET UNIT and press MENU ...