Question about Peavey Music
...vocal effects module into a mic line but it drops the output volume of the entire PA by about 75%. Any ideas why this is? I have a Peavey XR 8600 PA, I have tried adding an external vocal effects ...
...vocal by panning it. You can get the dry guitar signal from the guitar thru socket and turn the guitar level down to zero, which will give you separate guitar and vocals but does mean that you won't ...
vocal mic on mackie 1604 vlz3 wich setting on eq would be the best for male vocal i,m having a hard time to get good sounding vocal maybe the mid There is no easy answer to this. It will depend on the
...vocal mic on mackie 1604 vlz3 having hard time to get good eq on lead vocal need to play a lot with mid frequency which would be best eq for male vocal ...
vocal voice trhought mic on psr 9000 You could record short "samples" to be used in building new voices, however, it does NOT appear that you can record a vocal song with the PSR9000. The Tyros II and
No mic coming though on vocalist live 4 Just bought the vocalist live 4 My guitar is coming through nice and clean but I can't here any vocals. My leads and mic are all in working order and I ...
vocal performance produces distortion on single voice and harmony output. You need to check the actual signal levels to make sure they are within the specs for the unit. The mic input is low impedance
...other vocal present. The way to connect this is to run YOUR mic into the B205D and then run the line output that is intended to run to other B205D's from the B205D into a channel of the
...of the Lexicon Alpha? If you connect the mic to only one channel you will only get one channel UNLESS you process the .wav file and PAN the vocal channel into both channels when outputing to your
Question about DIGITECH Music
...vocal cuts out completely from time to time. Comes back after a while but keeps cutting out at intervals. Have two of these and both do it. Is it my set up, is it overload in some way. Guitar ok. Use ...
4 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: