Question about Behringer Music
...load. That would equate to about 900W RMS bridged into 8ohm or 450 per side into 4ohm loads per side. You can't daisy chain all 4 speakers....impedance would be too low. You can run two of your ...
...daisy chaining , am I going to damage my amp etc.? I have just purchased a Peavey 4080 hz amp and want to run my 2 EV's off one channel and 2 x Yamaha 500's off the other but not do ...
...load was 8 ohms for the series/parallel arrangement which is well within the 2 ohm drive capability of the Crate according to specs. I question if you really mean the speakers were in series? This ...
...T The tuner uses around 500 ma which may be nearly all your wall wart can put out... DO NOT overload the power adapter by daisy chaining other pedal power loads on
44 questions posted
Usually answered in minutes!
1 Questions
9 Questions
