Swisher 44-Inch 12.5 HP Trailcutter #RTB12544 "rough cut" Questions

its hard to start but does run rough once it is started. it blows light blue smoke once it get warmed up but it still cuts as good as it did when it was new.the blue smoke doesnt show up until it gets

...the left one scalps on one side and leaves a long rough cut on the left side. We put on new blades, but that didn't help. What else could be wrong? check if blades are even ! other than that ...

rough cut 14.5 hp Changing the belt on the swisher 44' rough cut - mine is a model RTB134412v. You have to remove the belt guard (4 bolts) and then the 6 bolts holding the engine on to the deck. Lift

...rough and can't cut. The shaft might have gotten bent making the blade wobble. The blade must be balanced for it to run correctly and cut right. Also check the grommets on the shaft and make sure ...

...cut the last .25 acres of yard.....it started running really rough and smoking from under deck....it starts up but the blades will not engage. .... burning rubber smell? Sound like you have done a ...

on a level surface the ride is smooth, however when i attempt to go uo a slight incline the ride is rough. Why? It could be fuel related when you incline. Either not enough gas in tank or float is not

...rough ground. Even on fairly level ground if there is a raised bump the opposite side will dig into the ground and I have a lot of bare ground slices throughout my large lawn. how can I adjust that ...

rough ground.. also sputters when you shake the tractor.. all interlocks have been bypassed as i thought this was the problem. fuel cut solenoid replaced with bolt.. carb off and cleaned many times...

I have a 19.5 HP Craftsman 42" riding lawnmower while cutting tall grass it started running rough. Checked plug it was black replaced plug started engine still ran rough then died and will not start. ...