Vtech i5808 Cordless Expansion Handset "loss connection base phone" Questions

...loss its connection with the base phone Often the handsets must be re-registered when they won't work. Sometimes they have to be de-registered, then re-registered before getting them to work. Uniden ...

...loss my connection of telephone KX-TG 5632to the base from the handy , I need the way to register it from the base, thanks for your cooperation 1 Handset: {MENU} i {0}{0} 2 Base unit: Press and hold ...

...base" (one connected to the phone lkine physically) in the center of the home so that the limited range can reach the remote phones at the periphery. These phones operate at 1.9GHz. At that microwave ...

connection loss issue I buy another battery for the i5871. You are pretty close to the solution. The problem is the charge detection in the handset. All handsets on a cordless phone detect the battery

...base is only operational when you hit the 3,6 or 9 keypad #. It was working fine previous to this. The cordless functions..just can't use the speaker phone or remaining commands on the phone with the ...

...help me as I am at a loss. thanks Hope this is solved for you. If not, I found the connection for the battery a little temperamental and had to play with it a bit before the connection worked ...

...base and the handsets. (This is actually very unlikely but it's a simple check to make.) Next, try the test phone at another jack connected to this phone line, if you have one in the living area. If ...

...base has power. After that, you need to check the wiring to determine if the phone is faulty or where the wiring fault is. First, try a new RJ-11 telephone cord between the phone and the jack. (Make ...

...base. If there was no dial tone, then I check for dial tone at another jack for the telephone line with the wired phone. If there is a dial tone, then check the wiring for the first jack. There could ...