Vtech i5871 Cordless Phone "batteries power base" Questions

...base power supply from the wall, wait at least 1 minute, plug base power supply back into wall outlet. Reset remote by removing battery wait a minute, reinstall battery. If after the reset the base ...

...BASE power. 5. Plug back in BASE phone line. 6. Plug back in EXTENSION handset battery. Don't plug in BASE handset yet. 7. Follow steps to program EXTENSION. When successful: 8. Plug back in BASE ...

...be plenty) then reverse the last step (batteries+power-supply).When reboot is completed (watch for the normal screen on the LED display) just put the handset back on the base again, 'voila'

...power from the incoming 50v line). Batteries out of handsets is a last (addtional) resort. I've very rarely had to re-register. I have tried all solutions above. They offer a temporary solution at ...

...base no power" I tried to register handset to base. Still not working. Help your base should have power to get the handset working.make sure your base has power , may be loose connection, pull the ...

...line to base unit. wait 15 seconds or more. reinstall battery. plug in power to base. plug in phone line to base. put handset in base charger slot. wait a minute or more for all to reload from

...and power the base unit , place the handset on the base and select intercom or search remote. The base unit must automatically set the frequency to mesh with the handset and handshake to

...power from the phone., batteries and the AC adapter for about a minute and if there is a reset button on the base reset it then reinsert the batteries (if it has batteries) and restore the 12 volt ...

base from power and phone line take batterie out of handset.If posinle check voltage of batterieIf it test ok put batterie back in handset then place handset in base plug bace to power and phone line.

...base power pack - by others unplugging it) Check line cord at base unit is plugged in too base phone not working suggests no power on base and phones battery has gone flat . Check power plug at base ...