Dyson AM04 Hot Cool Heater/Table Fan - Silver "turn work heat" Questions

...work anymore goodman compressor goes into defost cycle ,aux. heat strips won't turn on any more. Turn t-stat to emergency heat and see if heat works then if not check circuit breaker if thats ok you ...

...work during the day, then turn the output control up when I get home. But hardly any heat comes out!!! When should the early and late boost be used? Output switch is the one that says Cool-Off-Heat. ...

...turn the heat on. We have it on permanent hold as opposed to schedule? Auxiliary Heat is used to turn the electric heat strips ON, If the heat pump is not working. Or if the heat pump can't bring ...

heat never comes back on unless I turn the heater off for several minutes. Sounds like the high limit switch on the heater is kicking off. The flash is the switch shutting off the heating element. The

work. Then, leaving the remote on, turn off the fan at the wall switch (or circuit breaker box). Wait a few minutes. Then turn on the power and within 30 seconds, press the reset button. You should be

turn on your heat and and turn fan to on postion if it works you need to set tstat to electric heat mode. Most of the time there is sswitch in the back of the stat that says gas elec. Turn to electric

...heat will not kick on and i have it set to 81 Turn the thermostat completely of leaving the propane on.Make sure it is plugged in and the ignitor functions Slowly turn the thermostat up and see if ...

turn on heat We have a honeywell thermostat. When we turn the heat on, the words, "heat on" blinks. Then, we hear a buzzing sound, sort of like an alarm and the panel on the thermostat says, "aux heat

but when I woke up this morning the temperature was 69 degrees. When I got home I played with it. I turned it to the ON switch but only air came out no heat. I turned the HEAT switch off and the other

...work when I place the control on "continuous" and the aux/supplemental heat does not turn on on the indoor unit eeven though the thermostat indicates it's on. I checked my aux/supp coils and they are ...