Pump not working The filter is not working need more info does system have power to pump motor? if not check breaker if voltage from breaker check switch if you do have power to the pump motor sounds ...
...pump will not work We have 2 filter pumps and neither one would work. My husband kicked them both, and finally one started working. The other one still will not work. This has been in the garage all ...
...working Water was leaking from out filter basket housing, we replaced the O-ring as well but it still squirted water when we turned the pump off. When we turned the pump back on the pump made a small ...
pump is making a screeching noise. ts been working fine but yesterday I did try to press the button to stop the bubbles but it wouldn't work and then today when I came home from work it was screeching
...pump that is not working. I have power from the circuit board but the pump does not come on to close the flow switch therefore it will not heat. If power (240v) to pump and impeller spins, it ...
pump worked fine in the fall, turned on pump and i... Pump worked fine in the fall turned on pump and it just hums RUST ON ROTOR AND OR BEARINGS.. THESE ARE A FRAGILE PUMP, TAKE CARE WHEN TIGHTING THE
Question about Pentair Pool & Spa
...pump stopped working? I checked the breaker and it was fine. Nothing is happening Try connecting the pump to the mains and bypassing the timer. If the pump works then the timer is faulty and needs to ...
...pump and a Hayward Navigator sweep. The sweep was working then stopped. Pulled it apart found bad bearings replaced them. Ran sweep again worked at first briefly then nothing. Pulled apart pool pump, ...
39 questions posted
Usually answered in minutes!
1,045 Questions
287 Questions
93 Questions
43 Questions
28 Questions
