Qca Spas Jewel Series Topaz Plus Hot Tub "replace temperature sensor spa" Questions

Ad

...temperature reaches over 110 degrees in the event of a thermostat failure. But more commonly, (if the water temp hasn't gotten too hot) it indicates that the temp sensor(s) have failed. If you have a ...

Ad

Question about Qca Spas Pool & Spa

1 Answer

...temperature sensor, or the high temperature sensor have fallen out of the thermowells, you will also get this code. If everything is where it should be, then replace the high limit temperature

Ad

Question about Qca Spas Pool & Spa

2 Answers

...temperature sensor (check the wires for damage) or a bad circuit board. I would recommend replacing the temp sensor first. If that doesn't work, pull the board and take it and have it tested. Always ...

Question about Raypak Pool & Spa

1 Answer

...replace the thermister for this model--yet I can not find a model number in the parts replacement manual--HELP--where can I get the part that will match this model--what is the part number for this ...

...correctly within the pump. I cannot calibrate the temperature anymore : The only thing i'm able to do is to shut on/off the heatpump. I think that replacing the temp sensor will solve this

...sensor pulled out of the housing. The water temperature needs replacing not the high limit found usually in the filter well question is about the heater - is the tub up to temperature when the heater ...

...code for a faulty Temperature Sensor. Try replacing the Temperature Sensor. I have seen many of these units have the wires chewed up by mice, etc., so you may want to check the wiring for any

...TEMPERATURE sensor and replace this sensor. The original freeze sensor is probably still good if you still have it. Check out this manual and refer to page 38 "problem solving" ...

Question about Qca Spas Pool & Spa

1 Answer

...temperature sensors mounted in the top of the heater tube one at each end. Follow the wiring from the sensor to the plug(s) on the PCB and check that the connections are good, they have a habit of ...

replace the temperature sensor. If you refer to page 22 in this manual http://www.jandy-downloads.com/pdfs/Allbutton_manual.pdf you will see that the temperature sensor is installed on terminals 5 and

Not finding what you are looking for?
Qca Spas Jewel Series Topaz Plus Hot Tub Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top Qca Spas Pool & Spa Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

john h

Level 3 Expert

29494 Answers

Are you a Qca Spas Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...