...tweeters from Mackie by contacting Mackie at: LOUD Technologies Inc. 16220 Wood-Red Rd NE Woodinville, WA 98072 Phone (800) 258-6883 Ask for the tweeter for the MR5 & MR8 the part number might be ...
how do I change tweeter for amp tweeter does not work u dont u use ebay
...intended for a small room for studio listening while mixing. If the speaker is OK, then the bass amp in the cabinet has a failure... pray, as that is cheaper to repair than a speaker. i replaced ...
...how did you go about buying the tweeters? Jose. These are Bi-Amped, that is have seperate amplifiers internal for the LF and HF. First have to find if the amp or the actual speaker driver is
Need to find out which is the proper speaker wires for hook up yellow to tweeter or sub? And striped one is positive or negative? You can probably trace which colors go to the smaller of the amps... ...
what kind of fuse does peavey pr15 passive use Here is a site that has PR15 fuses... shown as a 2.1 amp. Very strange value, and it must strictly be for the tweeter portion as 2.1 amps is nothing for ...
...amp as the tweeters seem to get blown in these. ALL of these calcs are based on the specs of power for the 501 model and ASSUME 8 ohm speakers... Recalculate if your units have different impedance ...
...make any sound. i think its blowed up, is there a fuse a something that could be replaced in the amp? no fuse in there unfortunately. The problem could either be a blown tweeter (but that would ...
the compression speaker does not work Here is your schematic for the power amp. There is a separate amp for the tweeter using a LM3886 which is fairly well protected. Open the unit and test the ...
...mind modding the cutout or screw holes to fit. I don't know what the crossover point is. The amp is rated at 130W Again, I don't necessarliy an OEM replacement (Yamaha wants $135 for it
7 questions posted
Usually answered in minutes!
192 Questions
108 Questions
85 Questions
69 Questions
