One For All URC-4021 Remote Control "sharp power button flash three" Questions

...sharp tv With the TV turned on. Press and hold the white TV button at the top of the remote until all four light come on at the top of the remote. then press the power button once now start pressing ...

...SHARP Y NEED THE CODES NUMBER FOR MY REMOTE CONTROL 3.2 IR try using a power scan: Verify the remote is a DISH Network remote. Look for the DISH Network logo on the bottom of the remote and Mode ...

...Sharp TV. The codes are: 628, 605, 740, 591, and 606. I have also provided instructions on programming the remote to the TV. Remotes: Basic (Television Only) Turn the Television On Press and Hold the ...

...brand. NB: Switch OFF and switch ON your TV with its front panel power ON/OFF switch each time before trying an other code. Universal Sharp Codes are 004 009 079 095 111 112 114 122 123 124 and

...sharp TV? Hello, you can try the search method, you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to ...

...power button to make sure it switches back on, (if you press ch+ too many times you can go back by pressing ch-) When complete press the magic or device key again to save the settings (light should ...

...sharp aquos 32" flatscreen cookie_0047, If you have tried entering the codes and it still won't work, the next step would be to do a power scan. This scans every code available for the TV, ...

...sharp linytron it worked on the vcr .the tv is one of those types that you can not change with out a remote.HELP Hello, follow this link to download the manual and the codes for your remotes: ...

...Sharp T.V. We have a JVC and Coby VCR and DVD. Willl you help us out here please! Hello, if you can tell me the model of the remote normally starts URC- this may be printed on the remote or on the ...

...sharp TV, I've managed to turn the TV off, but now I can't turn it back on. The TV remains on Standby and turning off the power doesn't do anything, it's still on standby when I turn it back on. I ...