Question about Locks & Locksmithing
...If someone has a similar lock, please advise the reset procedures. Thanks. I have a Unican 4000 series door lock and need to find code for it The factory-default master code for Unican 4000 is ...
...reset a security code for our existing weiser lock and it isn't taking the new code entered. To program the first code, press the reset button once, then enter your 4-8 digit code on the exterior ...
Question about Trinity Locks & Locksmithing
...reset, put the battery cover back on. Your lock is now back to out-of-the-box condition all fingerprint users encode have been deleted from the lock. The lock resumes to the new lock state (factory ...
reset the lock and do a complete reprograming of your master security code and any other code(s) you want to use. While normally, the master code and other programmed codes shouldn't have to be reset,
...lock is reset to factory default. i.e., 0123#. Warning: Make sure the default works before you close the door and lock. Now to apply new master code: Enter default 0123# and wait till the sound ...
...lock is reset to factory default. i.e., 0123#. Warning: Make sure the default works before you close the door and lock. Now to apply new master code: Enter default 0123# and wait till the sound is ...
Question about Safe International Locks & Locksmithing
...safe. Open the safe, press reset and enter your new combination. Then check it before closing and locking the
Question about Weiser Lock Locks & Locksmithing
lock, it's a 3 codes one.. and the problem you have is the third code not reset. You can put the same code in each third emplacement. you have just to press the program button 3 time for the third
...reset button once, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. This signals that your code has ...
3 questions posted
Usually answered in minutes!
160 Questions
40 Questions