Black & Decker SpaceMaker ODC325 Coffee Maker "machine thermistor" Questions

where is thermal fuse in cuisinart dcc-1200 it needs replacement The Cuisinart DCC-1200 doesn't appear to use a thermal fuse but instead seems to use a NTC Thermistor. Like thermal fuses this is ...

why does hot plate for pot will not heat-up/mr coffee BVMC-EJX36? No heat means either the heater element is "Open" or one of the 3 thermostats in Series with the Heater element is open. you will need

When turned on it doesn't do anything.It's not even a year old, any suggestions. Thanks Donna Internal thermistor or fuse(s).

coffee pot only brewing 1/3 pot intermittently brewing short pots defective thermistor. replace and test. Maybe try adding more water or the correct amount recommended for a full pot.

My Delonghi ESAM3200 is not heating up as quickly and taking much longer to reach steam temperature. Can anyone advise what the problem may be? Is it the thermostat in the generator? Can the ...

Thermistor value The 2 Thermistors in the heating eliment are OPEN what is there value? Are you speaking of the thermal fuses?? There should be a value like 102c or 110c or something like that. if ...

week coffee the coffee pot does not perk long enough. It stops after about a 1 1/2 minutes I did replace the thermistor and it did fix the problem. However, you can't get the exact replacement, so I ...

coffee maker is flashing error, what do I do? If it is an Error 2, Drain the coffee maker and open up the bottom part. You will see the burner with a metal clip. There are Two components on the burner

Thermistor value The 2 Thermistors in the heating eliment are OPEN what is there value? it leak's close to heating element cracked on red rubber tube on left side www.redfihsensors.com Thank's for ...

no hot water There is a little device called a thermistor, that is in series with the line to the heating element.  If this fails, you get no heat.  Most common problem with coffee makers ...