...electrical supply. 2. Remove the top panel and disconnect the wire plug to the pressure sensor. 3. Reconnect the washer to the electrical supply. 4. Press start and wait 10 seconds (washer will drop ...
...Remove the (2) screw holding the switch assembly to the front panel. 7. Pull the switch assembly into the door opening and unplug the electrical connectors. Install is the reverse of removal. Thanks ...
Question about General Electric Washing Machines
Do you have to remove back panel to get to rocker arms? Need to check for issues. You remove the front panel. There is a diagram inside the control console to show removal and troubleshooting.
remove all screws holding the pump in place. The electrical should be a quick disconnect adapter. It might help to drain the assembly first -- just follow the instructions in the Use & Care manual
electrical connections. Remove the last two screws for the control panel ( which are now visible). Disconnect the electrical connections 2 or 3 as well as the safety override wire. (These are all plug
...remove all screws holding the pump in place. The electrical is a quick-connect adapter. Save yourself a mess by draining the assembly first -- just follow the instructions for draining/cleaning the ...
...electrical supply and release the console. 2. Releasethe bellows fromthe front panel and remove the (2) screws holding the door safety switch assembly to the front panel. 3. On select models, ...
...remove one screw behind dispenser drawer front and one screw at each upper corner of control from back side of control. Panel is still held by tabs across top. Be careful, as there are sharp areas ...
Question about GE Washing Machines
REMOVE FRONT PANEL - ZIPPER PARTS STUCK IN DRUM GUIDE. THERE APPEARS TO BE A METAL ZIPPER BROKEN UP IN THE GUIDE AT THE DRUM OF THE DRYER. I WANT TO REMOVE THE FRONT PANEL TO CLEAN IT OUT. I found the
Question about Bosch Washing Machines
panel at the back of the machine ALWAYS disconnect electrics....You need to access the motor from the bottom of machine.as it is a pig to work on if you try to replace the bushes whilst in situ...what
18 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: