Bosch Classixx WFL 2066 Front Load Washer "1400 express fit" Questions

...6 1400 express washing machine which works fine but only splns very slowly,What can be the problem ? Probably needs new brushes fitting in the motor, you will have to remove the motor to do

...1400 express .fills then counts down through its cycle then drains but drum not turning even when just on spin. thankyou sound like the motor brushes are worn out, just remove motor and fit new ...

...1400 Express does not start at all, does not fill. Hi, I have a Bosch Classixx 1400 express washing machine. I turn on the machine and nothing happens. The machine does not fill with water, also the ...

...1400 EXPRESS, ARE THEY SEALED IN THE MOTOR .CAN YOU REPLACE THE BRUSHES OR DO YOU HAVE TO BUY A NEW MOTOR? Some of the motors Need A HALF motor which is the end section with brushes fitted, quite ...

...1400 express, had F21 error which I cleared but now when set to wash, water comes in but the drum doesn't move. Machine is about 5 years old. Is this worth repairing? F21 refers to the carbon brushes ...

1400 express washing machine door wont open and it says f16 in the display panel Hi, The "F16" on a Bosch indicates the door is open / unlocked. If it's happening during a wash it would suggest either

...1400 express its showing e04 i have taken all hoses off and flushed them all out and cleaned out the pump checked the u bend and that the clip is not done up 2 tight! still not draining and still ...

...1400 express washing machine made a noise whilst on wash cycle, sounded as if it was going through the normal programme, but on checking no activity in drum and all lights on front on machine not ...

...Express 1400 7 years old Time is appearing and counting down ok. Machine is filling up and is warm as expected but machine is not washing, drum is not going around. The belt could have snapped. All ...

1400 express washing machine door has came off. is there any way of getting it back on ? thanks wendy door has a bit of the plastic broken off where the hinge fits into but i can't get it back