Bosch Logixx WFT 2806 Front Load Washer/Dryer "error fault 15" Questions

Ad

...15 min into wash with this code Hi Nikki, Is it 5e OR e5.... The link below is a samsung washing machine error code list, I hope this helps............CHEERS.. Samsung Washing Machine Error Fault ...

Ad

...FAULT CODES: AE or AE6 SAMSUNG WASHER ERROR DEFINITION = communication errors sub and main PBAs - main and inverter PBAs AE and AE6 represent communication errors between the sub and main PBAs or the ...

Ad

Question about Washing Machines

1 Answer

...nothing else. After a delay of around 15 seconds it gives the 1 error code That is a leakage error, pull the access panel and check for water underneath the unit that might be cuasing it to fault ...

fault presure pipe blocked 5 flashes = NTC error 6 flashes = faulty control board 7 flashes = Motor jammed 8 flashes = Tacho fault 9 flashes = Motor triac on module board 10 flashes = Prog Selector or

Question about Fisher and Paykel Washing Machines

2 Answers

...fault code 12 means the flood protection error. It is likely the inlet water is coming at a faster rate then the controller of the machine expects. Try and turn down the inlet water tap to see if it ...

Question about Daewoo Washing Machines

1 Answer

...posts if you need more tips and info." Daewoo DWD M103 Service Manual Page 15 of 16 Daewoo CV701PC Service Manual Page 26 of 52 Daewoo Washing Machine Error Fault Codes Washing Machine pressure ...

error code to indicate a drive motor tach fault. ...If you're handy, you can fix your Samsung front load washing machine error code ....My samsung frontload washer shows e3 and the drum does not turn

fault Error 3 Not drained in time allowed - washing machine fails to drain water Check that filter is not blocked or obstructed Check drain hose is clear of any blockage or obstruction Check wiring to

Question about Fisher and Paykel Washing Machines

1 Answer

...FAULT.The 2 things that cause this error code to appear are a faulty pump or a faulty control module.The manual says this fault is detected by excess electrical current going to the pump.But even if ...

Question about Whirlpool Washing Machines

1 Answer

...error comes within 2-3 seconds. Whirlpool Washing Machine Displaying Fault Code PE The part(s) or condition(s) listed below for the symptom PE - PRESSURE SENSOR ERROR // Water level pressure switch ...

Not finding what you are looking for?
Bosch Logixx WFT 2806 Front Load Washer/Dryer Logo

222 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...