Bosch HBN 43L550B SS Electric Single Oven "turn fan oven cooling" Questions

turn red hot. Is this all normal? This is my first oven that has any kind of fan on it. The oven has internal fan at back of oven encircling the element that should get reshot when stat turned up high

...turn the oven off. The fan stays on until it the oven is cool then the fan turns off. I used the oven on Monday and the fan is still running today. Could it be the thermostat? Is it worth fixing the ...

...turn the fan, when fan is supposed to be on can feel the fan trying to turn and can turn fan to a point where it turns slowly for about a second. Also the thermostat in the back was blown. Fan ...

...front of the oven. When you turn the oven off this fan might operate for 5 to 10 minutes until the oven cavity cools sufficiently. If there was no cavity fan the oven and/or cupboard would

...fan will not turn off ovens There is a thermostat usually on the top or back of the oven which controls the cooling fan. When it cools down, the fan is supposed to turn off. I would say this ...

...fan should turn on. If it doesn't then check to see if there is a mains voltage present. If mains current exist but fan is not turning then replace fan. If mains voltage is not present then its the ...

...turn back on when the oven has cooled down help much needed there is an overheat stat in the oven which turns it off if overheating. the causes are several. 1 - oven thermostat is faulty and oven is ...

turn the fan on . yours sounds as if it is sticking . Other ovens are controlled by a rheostat a long tubed thermostat that goes to a main control consul on the oven , it controls the fan and responds

...turn on the lower oven first, the cooling fan comes on and the lower heats with no problem, but then if I also turn on the upper after turning on the lower, no F34 error code for the upper as the ...

...fan terminal block. The reason the oven will not turn back on is that the residual heat in the oven unit as a whole against the fan oven, is probably too high which causes the overheat device to ...