Question about Bravetti Food Mixers
...lock the beater in place.replacement beaters for it. It's the outer beater that is up closest to the side of the mixer bowl. Can you help me? I've look on line but can't find the beaters for that ...
...lock. The beater is not just touching it is fully resting on the bottom of the bowl which makes the mixer wobble and make banging sounds. What should I do? I would check the bottom of the beater ...
...but it won't budge. Will it turn at all? Try to soak it. Put a paper towel strip where the beater locks onto the shaft and soak ot with window cleaner. Let it soak for a while. If there's any ...
Question about Food Mixers
Mixer arm does not fully lock. Lever does not go all the way across. when running the arm bounces The "beater height" may be set too high causing interference with the lock mechanism. Please see the ...
...while mixing it has even worn the white off the beater. while off you can actually have the mixer locked and you can move the head up and down in locked position. Please help!!! The height of the ...
Question about MIXMASTER Food Mixers
...Beaters should have a wire on top side to lock, if missing will not lock. OR if beaters won't go all the way into the unit something might be stock up there to prevent them going deep enough to
Question about Black & Decker Food Mixers
...beaters to stay in, they won't lock in like they should, what am I doing wrong? the ixer came without an instruction manual, can anyone help? Each beater may be shaped differently and only will click ...
lock into place. Bowl-Lift models ? Unplug mixer. ? Place bowl lift handle in down position. ? Turn screw (B) SLIGHTLY counter clockwise (left) to raise flat beater and clockwise (right) to lower flat
...beaters rub against bowl; alignment seems wrong Hi, LAHR, by the symptoms you describe it appears that it?s time to adjust your mixer?s "Beater to Bowl Clearance" adjustment screw, which should be a ...
...mixer model #KB26GIXER. I tried to use it this morning and couldn't get the beater blade to lock in place. Isn't there supposed to be a spring and washer above the locking pin? (They seem to ...
6 questions posted
Usually answered in minutes!
25 Questions
9 Questions
7 Questions
13 Questions