RTO Atwood DSI-RV Water Heater-6 Gallon "7e" Questions

I have a G6A-7E electronic ignite water heater. I have a Atwood 6 Gallon Gas Water Heater Model #G6A-7E electronic ignite water heater. When I turn the switch to on I hear the mechanism clicking to ...

atwood g6A-7E wont turn off keeps heating water till tmp drips Some dripping at pressure relief valve is normal, but are you saying it continues to run excessively hot? Does water in trailer feel ...

GC6A-7E water heater wont light. I checked the thermal (in the plastic sleeve) and it conducts both directions using a DVM on ohm setting. I then checked power to ignition module where I am getting ...

I have an atwood g6a-7e water heater. The thermal fuse is bad. i need to know what temp and coltage the thermal fuse for this heater is. The numbers on the fuse do not mach any thing on the web. ANy ...

Atwood Water Heater G6A-7E, electronic ignition. Should after the water is heated a small flame is still present at the orifice. It is like a pilot flame. I thought that the electronic ignition was to

I have a 6 gallon Atwood water heater, model GCH6-7E, DSI, heater lights off on gas when swithch is placed to on position. Heats water very hot , but when switch is put in off position, flame is ...

My water heater will not light?? I have a Atwood water heater in my 1994 motor home model #GH6-7E. The water heater will not light. When you turn the switch on the single sense probe does not produce ...

water heater flame problem #G6A-7E heater lights just fine and stays lit the problem is at higher altitudes the flame enters the flame tube but exits the end as if to much pressure extends 3 or 4 ...

I have an atwood water heater model number GC6A-7E that ignites but does not stay lit for more that 5 seconds. It continues to spark after it lites so I am asumming that it is not sensing the flame. ...

I have an Atwwod G6a -7E system requiring a gas valve. I has a small consistant leak when not in use from the jet. I have looked at replacements on e bay however the s/n do not line up with mine. Any ...