in a pool of water (like it would in the station). After water cleaning, I returned the razor to the station, pressed the start button and it worked! Was able to do both the quick clean and auto clean
...cleaning station no longer recognize the shaver? If so, it's possible that the contacts have been bent out of position. It's a bit tricky to fix, though. You'll need to take the unit apart and then ...
...working. any ideas? Hi pi finch, Below are some troubleshooting steps for this issue. If you have any questions or need additional assistance, Consumer Care can be reached at 1-800-243-3050. Question ...
...cleaning and charging station. You will find a replacement for model ES7058 at shaveroutlet.com. See link below ...
...want to go buy solution if it still won't work. If you just want to test it, use water. It won't hurt it. If you need to replace the cleaning station, you will find a replacement at ...
...using the cleaning base. Also, be sure that the fluid level is sufficient. Lastly, you may be able to buy a used but working condition cleaning station off of eBay. New replacements are a bit
braun 8595 clean and renew will not charge or clean my razor, in fact it just ignores my razor it sounds like your clean and renew base will need to be replaced. you will find a replacement at ...
my andis clippers are experiencing blade not moving. it is not cutting. Push top blade to right side right with finger,then turn clipper on and dip into 3 in one oil,blades only,let clipper run for ...
...cleaning station to recognize the level of fluid in the cartridge, three times over the last couple of years. It seems to relate to a build up of shavings in the unit. To get it working again I ...
51 questions posted
Usually answered in minutes!
132 Questions
101 Questions
74 Questions
40 Questions
36 Questions