Makita & 1/2 Inch Drill  "variable speed" Questions

...variable speed not functionning I have the same problem with the variable speed not functionning on a Craftsman 15.2V cordless model number: 973.22600, did you ever find a solution? Txs, Louis G If ...

18v variable speed impact driver. I need to know something about speeds and settings. Bob Just keep it on high, vari-speed on an impact driver is not very useful unless working with delicate materials

Variable speed doesn't work on Milwaukee Magnum hammer drill I have a Milwaukee 5370-1 Magnum hammer drill and the variable speed doesn't work. I have replaced the switch but still it operates as ...

...variable speed control button is set to low) it goes running on full speed, without soft start, with high vibrations, breaking blades. How can I fix this problem? Is the malfunction electronically ...

..."brute tough" Bosch cordless variable speed drill is no longer variable speed -- it's wide open at first squeeze of the trigger You need to replace the trigger unit to correcxt the

variable speed not working The variable speed function is controlled by the switch.  If you only have off and full on, the only fix is to replace the switch (Bosch Part Number 2607202013).

if the variable speed feature on my drill is not working,what could be the issue If it works but no variable speed then most likely the switch is bad.

lost variable speed if the variable speed is gone you would need to replace the switch. MAKE note of how you remove it because they are polarity sensitive.

...not run if I crank up the variable speed switch. I can turn it to about nine o'clock and ten it dies. Replaced the brushes and it did not help. you should be able to replace the variable speed

variable speed not working Drill runs but no variable speed, only off or full speed The switch is bad. The part number is 2-610-998-107.