Makita 2704 Contractors 15 Amp 10 Inch Benchtop Table Saw "miter" Questions

How do I release the arm of a radial arm saw to cut miters? Near the blade there should be a clamp that allows the saw head to be tilted to cut an angle miter through the board. The other miter ...

...off area underneath the saw. Exploded diagram with parts list for LS1016 10" Dual Slide Compound miter saw is here. Owner's manual is here. If these aren't quite what you need, you can view other ...

Need to adjust Miter gauge for Delta tablesaw 36-977. The 90 degree stop is off 1) Before setting the Miter gauge, check that the blade is straight (parallel) with the slide grooves. Lock a board in ...

My 10" compound miter saw My 10" compound miter saw seems to have a bad switch, The blade turns manually, but when I depress the switch nothing happens. Just before the problem, I had released ...

can you tell me where I can buy a replacement miter guide for my table saw? Its the guide that helps you push the item through the saw for cutting purposes. Can't find the manual for the proper name ...

my LS1216 slide compound miter saws mitering table is stuck at 0 degrees it appears jammed although I've looked for something jammed stopping the plate from moving and see nothing, the handle locking ...

I have a GMC 10 in slide compound miter saw Model# sms250lsrul. the trigger switch is bad and needs replaced. Do you have a comperable replacement switch for KEDU HY38 24/12A 125/250V 2hp The model ...

...model number: 137.248830. The saw doesn't make square cuts, it is more of a problem when using the miter. I have followed the alignment procedure so that the right alignment screw is all the way in ...

owner's manual. Any ideas? Gil I understand that Denali is made by GMC. Here is the website for GMC miter saw manuals. http://www.gmcompany.com/index.cfm?module=manuals&cid=54 See if the 10" miter

I have an Accu-Miter 18-34 and recently broke the knob used to pull out the shot-pin. Is there a way of replacing the pin or locking module? Dennis Yes you can change the shot-pin. You will need to ...