Kirby G5 Bagged Upright Vacuum "safety switch" Questions

Ad

Question about Shop Vac Vacuums

1 Answer

...safety of a switch on any appliance or tool endangers both yourself and those around you. Just to by pass the switch, you would need to disassemble the appliance. If you are going to do this then get ...

Ad

Question about Kirby Vacuums

2 Answers

...safety switch /reset button or did the on/off switch go out - I have had it 15 years & replaced the switch 1 time - Thanks http://geeksquad.fixya.com/ThreadView.aspx?prdid=11560&thid=798201 Kirby ...

Ad

Question about Kirby Vacuums

2 Answers

will not turn on Make syre that both safety switches are engaged. See the instructions here: http://www.goodvac.com/articles.asp?id=137#1.2.1 http://www.goodvac.com/articles.asp?id=143#1.3.1 Good Luck

...safety switch but the Kirby will not turn on to blow air Blower instructions HERE. It MUST help. If you put it back together as VACUUM and it works with hose (attached to suction) and the nozzle - no ...

...safety switch in the nozzle goes bad. Shark vacuums are considered disposable and they don't sell parts. That doesn't mean it can't be fixed though. Take it to your local vacuum repair shop and have ...

...switch or fuse? any thoughts. or safety triggers? Internal breaks in the power cord is the common cause of failure followed by the switch and it isn't unusual for the safety thermal breaker to

...is a safety switch there that may not ne engaged. Cord may be bad, one side of the line may be open. Noozle asm. not on straight, there is another safety switch there. Problem with switch or

...safety switch and seeing if it runs. Maybe the nozzle's poker isn't pushing it in adequately? getting the fan off the motor of kirby seif repair. If you ever need to replace your power switch, see my ...

Question about Kirby Vacuums

2 Answers

...safety switch in the motor area that, if not engaged correctly, can result in your vacuum not running. The most common thing that's wrong is that at the bottom part of the motor, where the cord plugs ...

...to no avail. Thermal safety switch may be bad and not resetting. There is always a small filter somewhere that everyone misses and does not keep clean. Carpet Fresh will clog up filters pretty

Not finding what you are looking for?
Kirby G5 Bagged Upright Vacuum Logo

261 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...