...head off machine, look in round hole at back of head pick up the belt with the lifter to the 12 o'clock position first the refit head onto the machine, then release belt lifter to the square ...
...Belt Lifter to the right of the center position (fully clockwise) until the green arrows line up. Slide the slots on the side of the Carpet shampoo system over the outer shoulders of the Carpet ...
...Used vacuum twice & Belt went out of place. How do I maneuver it in correct position/back on track, so to speak? make sure belt lifter is on proper setting/ turning until stops/check right size ...
...position with the foot pedal. Turn the belt lifter fully counterclockwise to disengage the belt, and unlatch the head to remove it. The hose then sits on the mounting bar, and can be latched in
in the correct position to install the head. place the whole head onto the lower two tangs and lift up. now rotate the wedge clamp until it stops. then rotate the belt lifter till the knob is straight
Question about Kirby Vacuums
...belt lifter back around to the proper position and all should be well. If you still need help, you may call us at 1-866-509-1952. Thanks Hello! This guide may help answer the question.... ...
...belt lifter from the green "Belt On" setting to the red "Belt Off" position: Step 2. With the belt lifter turned to the red "Belt Off" setting, Turn the knob at the top of the bell shaped agitator ...
belt lifter when you try to hook on the belt. The belt is going to hook on the brushroller the same way it does on your vacuum head. Pop the brush roller in the head of the shampooer and then sit that
261 questions posted
Usually answered in minutes!
625 Questions
381 Questions
207 Questions
187 Questions