Kirby Generation 3 Bagged Upright Vacuum "reverse mode" Questions

...reverse mode Try this,Go back to straight stitch, zero your stitch length,zero your stitch width, turn your hand wheel towards you for few rounds then select a stitch length and see if the reverse ...

mode, only the forward works no reverse, any suggestions, i dont have a manual so anything would be helpful so when u pull it back it's like it's not engaged at all? then it maybe the reverse is out..

...mode, it almost seems that the suction is in reverse. Dirst comes out of the bottom. Please help me. With the unit standing upright, double check the clear plastic air passages on the sides of the ...

...mode=partsProd&target=main&frames=no&sponsor=000006 When the SHARK mop ehead assembly gets calcified: 1. unscrew 4 screw holding the pivot point 2. unscrew 2 screws holding the hose ...

...reverse notches on the bottom housing of the vacuum cleaner. Tighten all 3 screws back into the bottom plate. Make sure the vacuum is set to carpet mode, and turn the vacuum on. If you have any ...